Please look at the front of the QuickAccess Lock. Note the buttons numbered 1 through 0. There is also an OPEN lever and a CLEAR button.
There is no preset combination on your QuickAccess Lock. Select your own combination and keep the combination written down in a safe place.
For best results, select between three and seven numbers in your combination. Each number can only be used one time. Do not use number combinations that can be easily guessed.
WARNING: Improperly setting the combination is not covered under the warranty. Do not disassemble the lock. Doing so voids the warranty.
WARNING: Setting the combination without resetting the cam to the locked position may result in permanent damage and void the warranty.
With the unit open, turn the OPEN knob so that the cam is in the LOCKED position.
THE CAM MUST BE SET TO THE LOCKED POSITION BEFORE SETTING THE COMBINATION OR PERMANENT DAMAGE MAY RESULT. SETTING THE COMBINATION WITH THE UNIT UNLOCKED WILL VOID THE WARRANTY.

First, clear your combination. Make sure the cam is in the locked position.
Remove the plastic card from the back of the lock by lifting from the center of the edges.
You will see ten numbered arrows on the back of the lock. These numbers correspond to the numbered buttons on the front of the lock.
All the arrows point up because there is no preset combination. Arrows pointing up are not part of your combination. Arrows rotated a half turn down are part of your combination.
Using only the screwdriver tip on the plastic card provided, rotate the arrows to point down. For each number in your combination, apply light pressure and rotate a half-turn so that the arrow points down and raises back into position.
Check to make sure that the arrow of any number that is not in the combination is pointing up and flush with the back of the lock.

Applying light pressure, use the included code change tool to rotate any number you want in your combination to down.
Any arrow facing down is part of your combination. Any arrow facing up is not part of your combination.
Please note: This lock is equipped with a clutch mechanism to protect it from forced entry. Do not be alarmed if the OPEN lever turns even if the correct combination has not been entered.
Test before locking the QuickAccess Lock.
Once your combination has been set:
Supra, 4001 Fairview Industrial Dr. SE, Salem, Oregon 97302
1-800-225-2974
Supra warrents the original buyer of its product for a period of one year after the date of purchase that the QuickAccess Lock is free from defects in workmanship and materials. This warranty does not cover forgotten or incorrectly set combinations. The foregoing warranty does not cover damage caused by abuse or misuse. Supra does not warrant that this product cannot be broken into.
SUPRA LIMITS THE DURATION OF ANY LEGALLY IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, TO THE DURATION OF THIS WARRANTY.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
Except to the extent that such limitation may be prohibited or limited by federal or state law, the foregoing repair/replacement remedy is the exclusive remedy for defects in products.
IN NO EVENT WILL SUPRA BE LIABLE FOR LOSS OF USE, LOST PROFITS, THEFT, PROPERTY DAMAGE, OF SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY SORT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY SORT, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN THE EVENT ANY OF THE ABOVE LIMIATIONS ARE HELD UNENFORCEABLE, SUPRA'S LIABILITIY FOR ANY DAMAGES TO YOU OR ANY PARTY SHALL NOT EXCEED THE PURCHASE PRICE YOU PAID, REGARDLESS OF THE FORM OF ANY CLAIM. IN NO EVENT MAY A CLAIM OF ANY SORT BE ASSERTED AGAINST SUPRA MORE THAN ONE YEAR AFTER THE ACCRUAL OF THE CLAIM.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
