SIMPLEX PUSH-BUTTON COMBINATION LOCK WITH KEY OVER-RIDE
The following is the instructions for changing the combination on your Simplex Push-Button Combination Lock with Key Over-Ride. If you need instruction on our discontinued Supra 10-Button Combination Lock expand the instructions at the bottom of this page.
To view a PDF version of the Simplex lock instructions click: Here.
SETTING/CHANGING YOUR COMBINATION
STEP 1. Open Drawer - Remove allen screw from the left side of the lock.
STEP 2. Clear the lock - Turn outside thumb knob to the left to clear the lock.
STEP 3. Enter existing combo.
STEP 4. Insert allen wrench into the hole on the left side of the lock to depress internal lockout slide.
STEP 5. Turn thumb knob back to the left.
STEP 6. Enter new combo.
STEP 7. Turn thumb knob to the right.
STEP 8. Repeat steps 5-6.
If the thumb knob retracts the cam and you have not entered your combination, steps were done out of order and the lock is in zero code. Repeat steps 2-4-5-6-7 & 8.
This product is warranted to be free from defects in material and worksmanship under normal use and service for a period of one (1) year. However, this warranty does not cover problems arising out of improper installation or use. Our only liability, whether in tort or in contract, under this warranty is to repair or replace products which are returned to the factory, shipping charges prepaid to the address shown within the one (1) year warranty period.
Our warranty shall only apply if the item returned is found by analysis by factory personnel to be defective.
This warranty is in lieu of and not in addition to any other warranty or condition, express or implied, including without limitation merchantability, fitness for purpose or absence of latent defects.
SUPRA 10-BUTTON PROGRAMMABLE LOCK INSTRUCTIONS - DISCONTINUED